Dark hawk


Recharging the Disposable Needs a Bunch of Supplies


Take a look at these quick steps that should get the battery charged in no time. You’ll need a small flathead screwdriver, a pair of tweezers, and an old Bluetooth speaker. Dismantle the speaker and pull out the circuit board. Remove the battery and you’re left with two hanging wires that you can use. Alternatively, use an old USB cable and convert it into a charger. The process is similar to building a DIY Juul charger. Here’s what you’ll do next to recharge a disposable.

Check the bottom of the disposable and you’ll notice a tiny gap at the base. Use your flathead to gently ease the cover out of the device. You’ll see the battery and tank neatly tucked into the case. Dark star
Tug it out slowly but not all the way. Just enough to expose the sensor and wires. Remember how the wires are fitted since you’ll need to put it back exactly in the same way once you’re done recharging. Buy weed in Queensland
Remove the tape holding the wires in place and connect them to the terminals on the speaker circuit. Take care to connect the colored wires correctly or you could damage the device completely.

Attach tapes to hold the wires in place while the device charges. Give it about 5 to 7 minutes and then try to take a hit.
If you think that the clouds are not as dense as you would like, charge it up for another 7 to 10 minutes.
Oftentimes, batteries tend to die while there’s adequate e-juice for around 100 hits. That’s not really the rule though. You could also run out of e-juice while the battery still has a charge. 1937 Vape Carts Full Gram

Dark Hawk rechargeable Disposable Devices are 1 gram.

Dark Hawk Flavors:

Ice Cream Cake (Hybrid)
Mango Kush (Hybrid)
Sherblato (Hybrid)
Blood Orange Tangie (Sativa)
Pink Champagne (Sativa)
Sour Zkittles (Hybrid)
Biscotti (Indica)
Durban Poison (Sativa)
King Louis Og (Indica)
Berry Punch (Indica)


There are no reviews yet.

Be the first to review “Dark hawk”

Your email address will not be published.

Shopping Cart
Translate »
error: Content is protected !!